Steam Floor Cleaners

Risky Business music video

We bought a house with a very dirty vinyl floor. Ordinary floor cleaners don’t seem to clean it. Is there anything that will give it a more extreme cleaning to remove the dirt that is practically embedded into the surface of the vinyl?

www.greensafeclean.net This green floor cleaner works great and saves time and money. Our green floor cleaner does not require rinsing. Just let the green floor cleaner do the job, go wowgreen

Lets talk today about bare floor steam cleaner.  This is the replacement for the dirty soapy water and a mop.  These types of steam cleaners provide deep cleaning and sanitizing of countertops and floors.

The old Way of Mop and Bucket is Over

We all know for a fact that cleaning can be quite messy especially if you are doing it the old way by using a mop and a bucket full off soapy water. Because of this, not a lot of people like to clean their house. Some just hire cleaners to do the dirty work for them, while others purchase cleaning devices that can make cleaning a little bit easier and a little less messy. If you can’t afford to get a cleaner to get your home cleaned once in a while, then you may want to invest in a portable machine.

No More Chemicals for Floor Cleaning

With a bare floor steam cleaner, you will see that cleaning will be a lot easier. The great thing about them is that you don’t even need to use cleaning chemicals in order to achieve sanitation.  This is a chemical free operation.  Steam cleaners will provide you with a way to efficiently and easily make your floor cleaner. With this cleaning device, you will be able to save time and money on your cleaning routine.

How Do They Really Work

Basically, steam cleaners work by boiling water and producing steam. The steam should be at a high temperature or 250 to 280 degrees Fahrenheit to be more specific. The steam inside the boiler will then be ejected at high pressures or at around 60 psi. By combining hot and dry steam vapor with high pressure, you will be able to loosen dirt and stain that is stuck on your carpet or floor. It will even do this much more efficiently. You don’t have to bend down and scrub your floor or carpet to get the stain or dirt removed, but you just need to use the power of superheated steam ejected in high pressure through microfiber pads.

This cleaning power doesn’t just clean but the high heat of the steam alone is enough to sanitize or disinfect the area you cleaned. The high heat of the dry steam vapor will be able to clean dust mites, molds, fungi, and even bacteria as well as other parasites on the spot. So, you are not only cleaning your carpet or floors, but you are also sanitizing or disinfecting it with the steamer.

The Manufacturers of Steam Cleaning Products

There are many different manufacturers and products on the market today.  Some companies have several different model numbers.  These units are light weight and easy to move around.  It is like having a steam cleaner mop. These different models come with replacement pads that work great on bare floors.  Here ae some of the manufacturers:

Bissell
Hoover
Shark
Eureka Floor Steamer
Enviro steamer 313a
and many others.

Because these products don’t use harmful cleaning chemicals or agents, it means that it is environmentally friendly. If you are concerned about the environment and worry about how cleaning chemicals can negatively affect it, then floor steam cleaners are definitely for you.

No Inhaling Hazardous Fumes

Obviously, because you will not be using any chemicals to disinfect or sanitize, you will be able to avoid storing hazardous chemicals in your home. And, you will not be in any danger of inhaling the fumes which can have harmful effects on your overall health.

They can work on virtually any surfaces. It can work on hardwood floors, carpets, rugs, linoleum, ceramic tiles, and other surfaces. It is also safe to use on all the rooms in your house. Most come with a long electric cord to help get around the house better. You can even use it to clean the kitchen as it only uses steam to clean. And, because it is suitable for virtually all types of surfaces, you don’t need to carry around numerous cleaning equipment in order to totally clean your entire house.

So, if you want to clean your house thoroughly without the hassle of messy cleaning, then you will want to get a bare floor steam cleaner. This doesn’t only clean your house, but also disinfects it. It is also the safest way to clean your home and it is also the most environmentally friendly way to do so.

Need More Information…

www.greensafeclean.net wowgreen floor cleaner works great and saves time and money. The wowgreen floor cleaner does not require rinsing. Just let the wowgreen floor cleaner do the job wowgreen

Carpet is made up of fibers, mesh backing, an attached cushion, and the latex adhesive to hold the pile of twisted fibers in place. Better carpets have better latex adhesive. As for fibers, they may be nylon, olefin, polyester, acrylic or wool. By far, the majority of carpets sold in the United States are nylon, thanks to its durability, colorfastness, stain and soil resistance, and resilience to matting.

Carpet cleaning, fine upholstery cleaning, in-plant cleaning for oriental, area & specialty rugs, air duct cleaning, carpet repair & rest retching, 24hr on-call water removal & structural drying, spot dyeing, mattress cleaning. Professional carpet cleaning, upholstery & cleaning system, business & commercial services.

There are also those with purifier filters for asthma control. Upright hypoallergenic vacuums will clean the air as well as the floor. Homes or offices with mold can our specialty vacuum cleaners that will get rid of mold and mildew. Stores that sell vacuum cleaners will also have parts and accessories to go with them. Employees can help answer any questions customers have regarding what type of vacuum cleaner works best for them. They can help determine if a vacuum cleaner that doesn’t use a bag would work best and what type of air flow and filter the vacuum cleaner uses.

Lexington carpet cleaner is the best way to clean our house with in short time. When you are thinking about choosing a company to clean your carpets, you must make sure that you choose the best company for this job. In order to choose the best company, you must properly search for a carpet cleaner company. It would be best if you ask you’re near and dear for suggestions about a carpet cleaner company.

Another good thing about hiring professional rug cleaning services is that aside from deep-cleaning, they also offer deodorizing and sanitizing services. Moreover, some establishments offer a liquid protestant for your carpeted floors so that they will be resistant from soiling and staining. Carpet is made up of fibers, mesh backing, an attached cushion, and the latex adhesive to hold the pile of twisted fibers in place. Better carpets have better latex adhesive. As for fibers, they may be nylon, olefin, polyester, acrylic or wool. By far, the majority of carpets sold in the United States are nylon, thanks to its durability, colorfastness, stain and soil resistance, and resilience to matting.

When shopping for a vacuum, you will see multiple categories. Household cleaners can help pick up dirt from carpet, hardwood floors, and tile. There are also those with purifier filters for asthma control. Upright hypoallergenic vacuums will clean the air as well as the floor. Homes or offices with mold can our specialty vacuum cleaners that will get rid of mold and mildew. Stores that sell vacuum cleaners will also have parts and accessories to go with them. There are also those with purifier filters for asthma control. Upright hypoallergenic vacuums will clean the air as well as the floor. Homes or offices with mold can our specialty vacuum cleaners that will get rid of mold and mildew. Stores that sell vacuum cleaners will also have parts and accessories to go with them. Employees can help answer any questions customers have regarding what type of vacuum cleaner works best for them. They can help determine if a vacuum cleaner that doesn’t use a bag would work best and what type of air flow and filter the vacuum cleaner uses. While cleaning dust and dirt from floors is important, customers will need to learn about the different settings the vacuum has for different floor types to get the best results.

Summer is officially here and that means, kids running around the house, barbecues and house parties and with that action keeping the house clean at all time it is not an easy task.

So to aid you with this never ending job we put together some cleaning to help you keep you house sparkling ready for the next party.

Cleaning Windows

Each summer, you should clean your outside windows and screens.
Always use a broom to remove spider webs and dirt before using water. Be careful of possible bee, wasp, or hornet nests.

Driveway and Deck Cleaning

The start of summer is a great time to do these once-a-year cleaning jobs. Our first tip is to not use a power washer! They are very dangerous to you, and can destroy your deck and driveway.

For outdoor decks, you can use a diluted mixture of TSP or deck cleaner, and then use a push broom or stiff brush to scrub the deck clean. Be sure to rinse well.

Grease stains can be treated with kitty litter or dry cement left to absorb the stain and then swept away.

Floor Cleaning Tips

Without a doubt the floor is the part of the house that suffers the most during the summer holidays, kids running in and out of the house with their shoes and trainers on, drinks that are spilled all over the house not to mention the barbecue salve all over the kitchen and patio floor.

Here are some tips on how to easily clean all types of floor:

- Ceramic tiling: Don’t use harsh abrasive cleaners that might scratch the tiles. Instead use a damp-mop on the ceramic tiles with an all-purpose cleaner. Then dry the floor with a soft cloth to avoid streaks.

- Vinyl floors: To wash this type of floor, use an all-purpose cleaning solution. Test any cleaner in a corner before using it on the entire floor.

- Wood floors: The most effective way of cleaning a wooden floor applying a liquid wood-floor cleaner with a dry wax applicator on a small area at a time. Let it soak for a few minutes, and wipe up the excess. When the floor is dry, buff with a floor polisher.

- Carpet Cleaning: The simplest way to keep your carpets clean is to vacuum regularly. But for an effective deep clean it is best to have your carpet steam cleaned.

Luggage Cleaning

Summer time also means summer holidays so it is time to get the old luggage out and clean it before stuffing them with your brand new summer clothes.
Firstly, clean the outside with a diluted mild cleanser (leather should be cleaned with a commercial leather cleaner).

If the inside has developed a musty smell, clean it with a vinegar-water solution. Then let it air dry for several days.

After your holiday and before putting the luggage away for storage, toss a fabric softener dryer sheet into the closed bag, especially if you don’t use the luggage often to keep it fresh.

So now you’re set, with our cleaning tips you will have the house ready for the next bash in no time. But if you have a larger environment that needs cleaning like an office, my advice is to leave it for a professional office cleaning company.

New Wet or Dry Floor Cleaning System Provides a Fresh, Convenient and Thorough Clean Every Time
When it comes to the “white sock test,” most household floors don’t stand a chance. That’s why O-Cedar® has introduced an innovative wet or dry floor cleaning system that redefines what clean means.

Read more on PR Newswire via Yahoo! Finance

Here are useful tips learned during more than 40 years of installing epoxy urethane floor seals and coatings on Fortune 500 company concrete floors, as well as in basements, garages, and decks. These tips can help you avoid mistakes that can limit the life of your floor.

There are three broad steps to doing your floor project: planning and preparation, repairing, and applying the coating. This article is the first in a three part series, and deals with planning and preparation.

General guidelines for applying an epoxy coating to your floor:

Do no harm.

Investing in prep produces the best value, (cost divided by years of service).

Let the chemicals and equipment do the work.

What can go wrong, will go wrong, unless you think ahead.

Technique is what separates mortals from Rembrandts.

An ounce of prevention is worth a pound of cure.

Now let’s get started with tips on how to plan your job and prepare your floor.

Plan the job.

Stick your coating to something that is not going to move

The better the tools, the less work you have to do.

Removing loose concrete is as important as removing dirt

Different types of dirt require different cleaners

“Shocking” the floor can help free dirt and contaminants.

Some things must be abraded off.

Don’t blow bubbles through your finish

There is only one way to remove gum

Asphalt bleeds

If you coat over things that move, your floor may move

Vacuum out those holes

Gravity is unforgiving

. Once you prep your floor, anything in the air will eventually end up as dirt on your floor. So don’t wait too long to do your coatings. Bugs, leaves, dust, and lint can eventually compromise the quality of the job you end up with.. Water settles in floor cracks and holes. If you vacuum them out or blot them with a rag, you will not have the problem of unexpected delays due to finding water still in your floor after the surface has dried.
. Adhesives are often a problem to remove on floors. But if you leave the adhesive, your coating is like an eggshell. A hard exterior with a soft interior will often let the shell crack and peal away.
. If you use a solvent-based floor coating and coat over any asphalt spots, the solvents will make the asphalt bleed into your finish spoiling the color. Use a scraper to remove any asphalt. Then follow with some degreaser or mineral spirits.
. Modern gum is actually synthetic rubber and is not affected by cleaners or most solvents. Scraping is the most common method of removing gum but a 190-degree hot water jet works fast if you have one.
. Gases often come up through your porous concrete floor. Methane and radon gas are very common under concrete slabs and move their way through the concrete causing some bubbles in the finish. But most often bubbles are caused by the chemical reaction still going on between your cleaners and the floor. One or two good scrub rinses are needed to help avoid generating gas bubbles in your floor.
Gum, adhesive, asphalt, some paints, concrete splatters, silicone sprays from Rain X, and Tire Shine are just some of the blemishes that you may need to scrape or grind off by hand when preparing a floor.
When you do your laundry you put your shirt in the wash and it is probably at a pH of 6.5 or 7. Then you add your detergent, which may bring the pH up to 8 or 8.5. That pH change is part of what make the dirt particles want to let go of the fabric. When we do floors, we shock the floor by bringing the pH up to 12 and then hitting it with the acidic cleaner dropping the pH to 5.5 or so. That really helps make concrete particles that are about to let to, let go.
. If one cleaner worked for everything there would only be one cleaner sold. But some dirt and contaminants, like fats and oils, respond to alkaline-type cleaners and some dirt and contaminants, like minerals, rust and concrete respond, to acidic-type cleaners. If alkaline and acidic are mixed they cancel each other out to neutral, so two separate cleanings are needed for your concrete floor, one alkaline cleaning and one acidic, followed by a good scrub rinse to stop the chemical action.
. If you walk over concrete with your socks on, you will usually see that they get all dusty. That’s because the concrete is constantly deteriorating and breaking away. Your preparation should leave only concrete that is well attached, so aggressive scrubbing is a must.
Renting power scrubbers, walk-behind vacuums, double-bladed squeegees, and long-handled scrapers are all multipliers that reduce your work and increase your performance. You can try to do without lots of fancy tools, but you might have to ask yourself, will you stop your work earlier than you should because it’s just too much work.
. Remember that a floor that has 3000 lb. or more going over it every day needs much better adhesion than a wall that may get brushed by an elbow occasionally. Stick your coating to something that is not going to move.
Save trips to the store and costly delays by getting everything you need ready before the job starts. One quick step would be to go to a website like www.concrete-floor-coatings.com for a free cost analysis which will list everything you need to do your job, including step by step instructions.

Remember, “Life imitates Star Trek.” You may begin to notice in the future that virtually every floor in the galaxy seems to have a flow-coated, two-part coating on it. I am seeing fewer and fewer new wood floors, linoleum, or oriental rugs. How about you?

Follow the rules and your job will turn out with the great look you want.

For more information, contact Harvey Chichester at harvey@concrete-floor-coatings.com or phone 1-800-466-8910 or 952-888-1488 (24/7).